Thermoplastic welding hoses meets all requirements for welding, brazing and cutting operations including oxygen and Acetylene welding by hand and machine. This hose is manufactured by using high quality tested raw material and using best quality nitrile rubber compound, in accordance with latest technology and in compliance with set industry standards.
Welding Hoses manufactured by us are BIS certified as per CML number 8700036611
Operating Fluid | Air |
---|---|
Max Operating Pressure | 20-25 bar |
Burst Pressure | 50 bar |
Operating Temperature | -5 °C to 80 °C |
Wall Thickness | 3.25 mm |
Material | Thermoplastic Hybrid PVC compound |
Reinforcement : | High Quality Synthetic Braided yarn |
Adhesion between Lining & Covers | At least 1.4 kN/m, in accordance with IS:3400 (Part-24):2001 / ISO 8033:1991 |
Fire retarding properties | Our Thermoplastic Hybrid Compound has inherently superior fire retarding properties due to its Chlorine content. Its ignition temperature is as high as 455°C, and is a material with less risk for fire incidents since it is not ignited easily. It is a self extinguishing material and does not continue to burn. |
Nominal Bore | Tolerances on Normal bore in mm | Minimum thickness of tube in mm | Minimum thickness of cover in mm | |
---|---|---|---|---|
inch | Mm | |||
5/16 | 8 | 0.75 | 1.5 | 1 |
Working Pressure | Testing Pressure | Minimum Burst Pressure | |||
---|---|---|---|---|---|
Kgf/cm2 | PSI | Kgf/cm2 | PSI | Kgf/cm2 | PSI |
12.5 | 180 | 25 | 360 | 50 | 725 |
Suitable for oxy-acetylene welding and cutting equipments in all types of industrial workshops, oil refineries, steel mills, ship building repair & breaking yards, service stations, garages